Automobile Products

Products for Fuel Cell Vehicles

1600_car_suiso_cut_a
Fuel cell vehicles are equipped with high-pressure tanks that are filled at a maximum of 87.5 MPa and
require a variety of compatible devices.

Keihin has taken advantage of the technologies it has developed for natural gas vehicles and applied them to fuel cell vehicles. So far it has developed 23 different hydrogen fuel control system products (including a high-pressure hydrogen supply valve that was the frst in the world to conform to international standards), ECU products, air control system products, and air-conditioning system products.

Note: See our product information section for details on key products within this group.

Related products

ECU for Fuel Cell Power Generation Control

Fuel cell vehicles use hydrogen as fuel. They produce electricity and water by m...

ECU for Stack Impedance Measurement

This monitoring ECU measures the impedance in the fuel cell stack to properly ma...

Battery Management System for Fuel Cell Vehicles

This system detects remaining battery capacity in fuel cell vehicles with a high...

Injector for Hydrogen Fuel Cell Vehicles

This injector controls the flow volume of decompressed hydrogen gas from the reg...

High-pressure Hydrogen Supply Valve

This main stop valve is attached to the high-pressure hydrogen tank, which store...

High-pressure Hydrogen Regulator

This device properly adjusts the decompression of hydrogen stored in high-pressu...

Cathode Pressure Control Valve

Fuel cell vehicles use hydrogen as fuel. They produce electricity and water by m...

Drain Valve

The drain valve releases water from the fuel cell stack to the outside of the ve...

Purge Valve

The purge valve releases water and impurities from the fuel cell stack to the ou...
PAGETOP